If you’re looking to Sell 3M Dynatel 965DSP Subscriber Loop Analyzer TDR

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

TDR – full-featured TDR with user-selectable pulse widths, length, gain zoom, filter and Vp. Four modes of operation:

• Single trace – provides graphical representation of events on a pair.
• Dual trace – allows active comparison of two traces.
• Differential – displays difference between two circuits.
• Crosstalk – displays the crosstalk from one pair to the other.

The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Flexible, practical features

The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include:

• IR port – infrared port for downloading future software programs.
• Self-calibration – internal instrument calibration and setup procedures.
• Graphical user interface – user-friendly, icon-based display of test results.
• Replaceable five color-coded banana jacks for test connections.
• HELP function – an internal help menu provides information as needed during operation.
• Telephone – internal telephone or “talk set.”
• Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder.
• Modular hardware and software design – for easy upgrades, investment protection.
• Backlit high resolution/high contrast LCD display.

The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds.

Buying, Selling, Trading 3M Dynatel 965DSP

If you’re selling your 3M Dynatel 965DSP please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP Subscriber Loop Analyzer TDR

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

TDR – full-featured TDR with user-selectable pulse widths, length, gain zoom, filter and Vp. Four modes of operation:

• Single trace – provides graphical representation of events on a pair.
• Dual trace – allows active comparison of two traces.
• Differential – displays difference between two circuits.
• Crosstalk – displays the crosstalk from one pair to the other.

Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:

• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Flexible, practical features

The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include:

• IR port – infrared port for downloading future software programs.
• Self-calibration – internal instrument calibration and setup procedures.
• Graphical user interface – user-friendly, icon-based display of test results.
• Replaceable five color-coded banana jacks for test connections.
• HELP function – an internal help menu provides information as needed during operation.
• Telephone – internal telephone or “talk set.”
• Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder.
• Modular hardware and software design – for easy upgrades, investment protection.
• Backlit high resolution/high contrast LCD display.

The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds.

Buying, Selling, Trading 3M Dynatel 965DSP

If you’re selling your 3M Dynatel 965DSP please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP-B Subscriber Loop Analyzer TDR

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

TDR – full-featured TDR with user-selectable pulse widths, length, gain zoom, filter and Vp. Four modes of operation:

• Single trace – provides graphical representation of events on a pair.
• Dual trace – allows active comparison of two traces.
• Differential – displays difference between two circuits.
• Crosstalk – displays the crosstalk from one pair to the other.

The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Buying, Selling, Trading 3M Dynatel 965DSP-B

Flexible, practical features

The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include:

• IR port – infrared port for downloading future software programs.
• Self-calibration – internal instrument calibration and setup procedures.
• Graphical user interface – user-friendly, icon-based display of test results.
• Replaceable five color-coded banana jacks for test connections.
• HELP function – an internal help menu provides information as needed during operation.
• Telephone – internal telephone or “talk set.”
• Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder.
• Modular hardware and software design – for easy upgrades, investment protection.
• Backlit high resolution/high contrast LCD display.

The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds.

If you’re selling your 3M Dynatel 965DSP-B please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP-BSI Subscriber Loop Analyzer

The Dynatel™ 965DSP Subscriber Loop Analyzer executes a wide range of individual tests and performs automatic test routines to categorize and sectionalize problems.The hand-held 965DSP test set is housed in a lightweight, ergonomically designed case for portability and ease of handling. The unit is weather-resistant and weighs only 3.3 pounds (1.5 kg).
The Dynatel 965DSPsubscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:The 3M Dynatel 965DSPSubscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge &resistance bridge functions).

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Buying, Selling, Trading 3M Dynatel 965DSP-BSI

If you’re selling your 3M Dynatel 965DSP-BSI please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965AMS Advanced Tester w/ TDR

Dynatel 965AMS Advanced Modular System

The Dynatel 965AMS system contains every feature of our previous 965 model plus a larger, brighter display that features 3MTM VikuitiTM Display Enhancement technology, a user-friendly icon-based interface and rugged field-swappable modules.* These external modules can be shared between technicians and allow transmission testing of a variety of OSP technologies.

This microcomputer-controlled flexible test set family provides full-featured testing for the triple play—voice, video and data circuits. Because it’s a Dynatel 965 series tester, the AMS model is easy to use, requiring minimal training for testing professionals. And because it emphasizes fault diagnosis and fault location, customer problems can be solved quickly.

Benefits

• Communications
• Capability to work with a PC or handheld computer supporting software upload and data downloads
• Flexible architecture
• Supports various data modem protocols such as ADSL2+
• Graphical user interface
• User-friendly, icon-based display of test results
• Help function
• An internal help and tutorial provides information as needed during operation
• Backlight
• High resolution/high contrast black and white LCD display
• Vehicle power adapter
• Plugs into standard vehicle accessory outlet
• Windows/CE operating system
• Provides open architecture software environment
• Allows rapid access to twelve different “blue key” functions, reducing menu levels. Also has cursors, and supports alpha-numeric entry
• Yellow and green LED lights
• Signal battery state and communication status
• Software
• TDR and auto-test knowledge based systems aids technicians during test interpretation
• Bright big screen
• Highly visible even in bright sunlight due to proprietary 3M™ Vikuiti™ brightness enhancement technology, 80% larger than 965DSP
• Modular design
• All you need is a new module to increase test capability (no need to replace test set)
• Dynatel yellow
• Rugged, dependableAUTOTEST
  The knowledge-based smart autotest function is the product of more than a hundred years of Dynatel team experience. It allows an automatic test of active and inactive lines with pass/fail limits. Autotest capabilities also include expert system analysis of test results with advice on how to repair or how to locate faults. 3M™ Dynatel™ Far End Device FED II and customizable selections of tests are supported by the autotest feature of the 965AMS platform.EXTERNAL MODULES
  The 3M™ Dynatel™ Advanced Modular System 965AMS modules are field swappable, testing the exact digital transmission modem needed for each job. The module supports special circuits technicians who work on a variety of circuit standards during a typical day. Because the modules are field swappable, the technicians can share them. So it’s no longer necessary to buy a separate testing platform for each set of modules.

  RUGGED, WEATHER-RESISTANT DESIGN
  The hand-held 965AMS product is housed in a lightweight, ergonomically-designed case for portability and ease of handling. The unit is weather-resistant and weighs only 5 lbs (2.2kg). The unit operates on a desktop, on the ground, up in an aerial environment and in underground locations.

  Buying, Selling, Trading FLIR 572
  

If you’re selling your 3M Dynatel 965AMS please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP Subscriber Loop Analyzer

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

TDR – full-featured TDR with user-selectable pulse widths, length, gain zoom, filter and Vp. Four modes of operation:

• Single trace – provides graphical representation of events on a pair.
• Dual trace – allows active comparison of two traces.
• Differential – displays difference between two circuits.
• Crosstalk – displays the crosstalk from one pair to the other.

If you’re selling your 3M Dynatel 965DSP please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP-B Subscriber Loop Analyzer

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Flexible, practical features

The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include:

• IR port – infrared port for downloading future software programs.
• Self-calibration – internal instrument calibration and setup procedures.
• Graphical user interface – user-friendly, icon-based display of test results.
• Replaceable five color-coded banana jacks for test connections.
• HELP function – an internal help menu provides information as needed during operation.
• Telephone – internal telephone or “talk set.”
• Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder.
• Modular hardware and software design – for easy upgrades, investment protection.
• Backlit high resolution/high contrast LCD display.

The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds.

Buying, Selling, Trading 3M Dynatel 965DSP-B/a>

If you’re selling your 3M Dynatel 965DSP-B please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP/SA Subscriber Loop Analyzer

3M™ Dynatel™ Subscriber Loop Analyzer 965DSP/SA

The Dynatel™ 965DSP Subscriber Loop Analyzer with Spectrum Analyzer performs a wide range of tests and automatic test routines. Test functions include fault location and repair verification on twisted-pair and drop cables.

The Dynatel Subscriber Loop Analyzer 965DSP/SA delivers all the multi-function capabilities of the Dynatel 965DSP and provides a Spectrum Analyzer and E, F and G noise-weighted filters. The Spectrum Analyzer test function enables the operator to view the high-frequency communications spectrum and identify spectral interferers such as crosstalk noise generated by other services.

The Dynatel 965DSPsubscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:The 3M Dynatel 965DSPSubscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions).

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

The Dynatel 965DSP/SA/ADSL Subscriber Loop Analyzes features an Alcatel MTK-20150 ADSL modem chipset in the proven 965DSP platform. The Dynatel 965DSP/ADSL provides the ability to perform active ADSL testing to address the growing number of residential and business ADSL customers. It delivers all the multi-function capabilities of the 965DSP plus the testing functions of the new ADSL modem. The 965DSP/SA/ADSL adds comprehensive DSL parametric measurements to this integrated solution. Extended loss measurement ranges, spectrum analyzer and E, F & G filtered wideband noise measurements complete this comprehensive family of rugged loop testers.

The Dynatel 965DSP and 965DSP/SA/ADSL test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds (4.5 lbs. with test leads and soft case). Preserving the rugged dependability of all Dynatel products, the /ADSL option incorporates an innovative design that adds a durable spacer element to the current 965DSP molded plastic case. This spacer permits easy and robust expansion of the new circuit board in the existing test set.

Dynatel 965DSP Specifications:

Product will incorporate all the features of the Dynatel 965DSP and/or 965DSP/SA Subscriber Loop Analyzers at the accuracy currently specified for these products (see 965DSP family product documentation). ADSL Datalink capability is limited to link synchronization. No PING or data application capability is provided. Modem will initiate a connection with the far-end under operator command. Status messages indicating link progress will be returned.

If you’re selling your 3M Dynatel 965DSP/SA please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965 Subscriber Loop Analyzer

Subscriber Loop Analyzer

The Dynatel 965 subscriber loop analyzer performs all the tests needed to analyze and troubleshoot the subscriber loop, as well as cable plant in a single, portable unit. In addition, the 965 uses combinations of its test measurements in automatic functions called DC Line Test and AC Line Test, which interpret results and lead the operator toward possible solutions to complex cable problems.

Buying, Selling, Trading 3M Dynatel 965

Includes:

• Dynatel 965 Subscriber Loop Analyzer
• Test Leads
• Strapping Cord
• User Manual On CD-ROM
• Hard Carrying Case

If you’re selling your 3M Dynatel 965 please fill out form on the right hand side of page.

If you’re looking to Sell 3M Dynatel 965DSP-B Subscriber Loop Analyzer

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable.

The Dynatel 965DSP subscriber loop analyzer executes a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:

• Voltage – detects and measures the presence of exchang or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance u to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.

Flexible, practical features

The 965DSP subscriber loop analyzer is designed for functionality and ease of use. Features of the unit include:

• IR port – infrared port for downloading future software programs.
• Self-calibration – internal instrument calibration and setup procedures.
• Graphical user interface – user-friendly, icon-based display of test results.
• Replaceable five color-coded banana jacks for test connections.
• HELP function – an internal help menu provides information as needed during operation.
• Telephone – internal telephone or “talk set.”
• Rechargeable nickel metal hydride batteries – with battery charger, plus alkaline battery holder.
• Modular hardware and software design – for easy upgrades, investment protection.
• Backlit high resolution/high contrast LCD display.

The Dynatel 965DSP test sets are housed in a lightweight, ergonomically designed case for portability and ease of use. The units are weather resistant and weigh only three pounds.

Buying, Selling, Trading 3M Dynatel 965DSP-B

If you’re selling your 3M Dynatel 965DSP-B please fill out form on the right hand side of page.